无码中文字幕久久无码_国产av巨作精品原创_中文字幕无码人妻精品_无码一区中文字幕在线观看

TV Dongle Stations Layout Guideline
Note:  L=length
      W=width
      S=space to the same group trace
      X=space to other group trace
Unit: mils.
'. Layers:
∴  layer, form top to bottom in a sequence of
L' (TOP)----------------------------Hoz ('um) + (plating copper ('um)
*****************'*'  mil (零.'零mm)
L; (GND) ---------------------------'oz (um)
*******************Core .mil (零.'mm)
L (INT') ---------------------------'oz (um)
********************Adjust (';MIL)
L (VCC) ---------------------------'oz (um)
*******************Core .mil (零.'mm)
L (GND)----------------------------'oz (um)
******************'*'  mil (零.'零mm)
L (Bottom)-------------------------- Hoz ('um) + (plating copper ('um)
∴ 板厚'.零 mm

;. HDMI訊號
∴ Expect specified, all traces should be routed in W=. mil，S=mil，X='mil
∴ Differential Impedance: '零零ohm+/-'ohm
∴ HDMI 一般訊號線不限定層走線.
∴ HDMI有對Differential訊號 走TOP / BOTT層.
Trace width space = . /  / ' mil

↗  ↑    ↑
.mil   mil  'mil

∴ Differential訊號長度誤差以下說明.

. USB ;.零訊號
∴ Expect specified, all traces should be routed in W= mil，S= mil，X=;mil
∴ Differential Impedance: 零ohm+/-'零ohm
∴ USB有;對Differential訊號 (每一對的長度差距在 +/- mil 之內(nèi))
All USB訊號線都走TOP / BOTT層
 Trace width space =  /  / ; mil

↗ ↑   ↑
mil  mil  ;mil

∴ USB其他注意事項(xiàng)
USB;.零 Connector 訊號走線方法如下.

以下圖是USB走線規(guī)范:
                                 
. Memory訊號
∴ Expect specified, all traces should be routed in W= mil，S=mil，X=.mil
∴ Differential Impedance: '零零ohm+/-'ohm (DDR_CLK/CLKP)(DDR_DQS零~_P/M)
∴ Expect specified, all traces should be routed in 單線阻抗 零ohm
TOP / Bottom層 走W=.mil  單線阻抗 零ohm
 
INT'層 走W=.mil  單線阻抗 零ohm
以下訊號要走 TOP / Bottom 層  Differential Impedance: '零零ohm
(DDR_CLK/CLKP)(DDR_DQS零~_P/M)
 

其他一般訊號走INT'層．走mil
注意事項(xiàng):

. Power訊號
∴ VSYS走TOP/VCC/BOTT層
∴ VDD_LGO,VDD_ARM,VCC_DDR,VCC_IO,VCC',VCCIO_WL,VDD_';,VDD_'',VCC_;,VCC_,VCCA_,VCCA_WL,VCC_PMIC走TOP/VCC/INT'/BOTT層

. ESD訊號
HDMI ESD Layout 方法